Underfloor Heating Pipe Fixings

Underfloor Heating Pipe Fixings: Secure and Reliable Pipe Retention

Underfloor heating pipe fixings are a range of fasteners designed to secure heating pipes during installation. They include staples, clips, and U-channels that hold pipes at the correct spacing. This article covers the types, benefits, and use of pipe fixings.

What Are Pipe Fixings?

Pipe fixings are components used to hold underfloor heating pipes in place on mesh, rails, or insulation boards. They come in various forms, including plastic staples, snap clips, and U-shaped channels. The choice of fixing depends on the installation system: mesh-based systems often use staples, while rail-based systems use clips. All fixings are designed to be quick to install and to hold the pipe firmly without damaging it. They are available in sizes to suit 16 mm and 20 mm heating pipes.

Key Benefits

• Secure pipe holding: Keeps pipes at the correct spacing during screed pouring.

• Quick to install: Can be hammered, pressed, or snapped into place rapidly.

• Pipe friendly: Smooth plastic will not scratch or damage PEX or PE-RT pipes.

• Corrosion resistant: Will not rust or stain the screed or finished floor.

• Versatile: Suitable for use with mesh, rails, and insulation board systems.

How They Are Used

The fixings are applied at regular intervals along the pipe run, depending on the system and the room heat-loss calculation. They are used to secure straight runs, around bends, near the manifold, and wherever the pipe needs additional support. Once the pipe network is fully fixed and pressure-tested, the screed is poured over the top. The fixings ensure the pipe does not float or shift during this process.

Conclusion

Underfloor heating pipe fixings are an essential part of any underfloor heating installation. By providing a secure, reliable, and pipe-friendly fixing solution, they help ensure the system performs as designed and delivers even, comfortable warmth.