Underfloor Heating U Clips

Underfloor Heating U Clips: Simple and Reliable Pipe Retaining

Underfloor heating U clips are U-shaped plastic fasteners designed to secure heating pipes to mesh, rails, or insulation. They are simple to use, durable, and provide a firm hold during installation. This article covers the features and use of U clips.

What Are U Clips?

U clips are plastic fasteners shaped like a narrow U. They are placed over a heating pipe and pressed or hammered through the mesh or into the insulation board on either side, holding the pipe firmly in place. They are made from durable, flexible plastic that will not scratch the pipe and is resistant to corrosion. U clips are available in different heights to suit 16 mm and 20 mm heating pipes and are used in both wet screed and dry panel underfloor heating systems.

Key Benefits

• Simple design: Easy to understand and install with no special tools.

• Secure holding: Holds pipes firmly at the correct spacing during screed pouring.

• Pipe friendly: Smooth plastic will not damage PEX or PE-RT pipes.

• Corrosion resistant: Will not rust or stain the screed or finished floor.

• Cost effective: An affordable consumable used in every underfloor heating project.

Installation Use

The U clips are applied at regular intervals along the pipe run, typically at every second or third mesh intersection. They are positioned over the pipe and pressed down until the legs grip the mesh or penetrate the insulation. Extra clips are used around bends, near the manifold, and wherever the pipe needs additional support. Once the pipe network is complete and pressure-tested, the screed is poured over the top.

Conclusion

Underfloor heating U clips are a simple but essential component of underfloor heating installation. By providing a reliable, pipe-friendly fixing solution, they help ensure the pipe network stays in place and the system performs as designed.