Plastic Underfloor Heating Pipe Staples

Plastic Underfloor Heating Pipe Staples: Strong, Safe Pipe Fixing

Plastic underfloor heating pipe staples are U-shaped plastic clips designed to hold heating pipes securely to mesh or insulation. They are lightweight, corrosion-resistant, and will not damage pipe surfaces. This guide explains the features and use of these staples.

Design and Function

Plastic pipe staples are injection-moulded from durable polypropylene, giving them the strength to hold heating pipes firmly while remaining flexible enough to install easily. The U-shaped legs are driven through reinforcing mesh or into insulation boards on either side of the pipe. Because they are made of plastic, they will not rust, will not scratch the pipe, and will not conduct electricity. They are available in heights suitable for 16 mm and 20 mm heating pipes.

Key Benefits

• Secure pipe fixing: Holds pipes firmly at the correct spacing during screed installation.

• Corrosion free: Plastic will not rust or cause stains in the screed.

• Pipe safe: Smooth, rounded edges protect PEX and PE-RT pipes from damage.

• Quick to fit: Can be hammered or pressed into place along pipe runs.

• Bulk packaging: Supplied in large quantities suitable for projects of all sizes.

How They Are Used

The staples are placed over the pipe at regular intervals, typically every second or third mesh intersection. They are hammered or pressed down until the legs grip the mesh or penetrate the insulation board. Extra staples are used around bends, near the manifold, and wherever the pipe needs additional support. Once the whole loop is stapled and pressure-tested, the screed is poured over the top without risk of the pipe shifting.

Conclusion

Plastic underfloor heating pipe staples are an essential consumable in every underfloor heating installation. By providing a strong, safe, and corrosion-free fixing solution, they help ensure the pipe network stays in place and the system delivers reliable warmth.