Plastic Underfloor Heating Staples

Plastic Underfloor Heating Staples: Durable and Pipe-Safe Fixing

Plastic underfloor heating staples are U-shaped plastic fasteners used to secure heating pipes to mesh, rails, or insulation boards. They are corrosion-resistant, lightweight, and safe for all types of heating pipe. This article covers the features and benefits of plastic staples.

Product Overview

Plastic underfloor heating staples are made from strong, flexible polypropylene or similar engineering plastic. They are shaped like a narrow U and are driven through the mesh or into the insulation board on either side of the heating pipe. Unlike metal staples, plastic staples will not rust, will not scratch the pipe, and will not leave marks on the finished floor. They are available in heights to suit 16 mm and 20 mm pipes and are supplied in boxes of several hundred for project use.

Key Advantages

• Corrosion resistant: Plastic will not rust inside the screed.

• Pipe safe: Smooth edges will not scratch or damage PEX or PE-RT pipes.

• Lightweight: Easy to handle and quick to install on site.

• Strong hold: Holds pipes firmly at the correct spacing during screed pouring.

• Cost effective: An affordable consumable used in every underfloor heating project.

Installation Use

The staples are applied at regular intervals along the pipe run, typically at every second or third mesh intersection. They are hammered or pressed into place over the pipe, gripping the mesh or penetrating the insulation board. Staples are especially important around bends, near the manifold, and at points where the pipe changes direction. Once the pipe network is fully stapled and pressure-tested, the screed is poured over the top.

Conclusion

Plastic underfloor heating staples are a simple, reliable, and cost-effective way to secure heating pipes during installation. By providing a corrosion-free, pipe-friendly fixing solution, they help ensure the system performs reliably for years.