Underfloor Heating Pipe Staples

Underfloor Heating Pipe Staples: Secure and Durable Pipe Fixing

Underfloor heating pipe staples are essential fasteners used to secure heating pipes to mesh, rails, or insulation boards. They ensure the pipe stays in the correct position during screed pouring and throughout the life of the system. This article covers the features and benefits of pipe staples.

What Are Pipe Staples?

Pipe staples are U-shaped clips made from plastic or metal, designed to grip underfloor heating pipes and hold them against a fixing surface. Plastic staples are the most widely used because they are lightweight, corrosion-resistant, and will not scratch the pipe. They are available in heights suitable for 16 mm and 20 mm pipes. The staples are driven through the mesh or into the insulation board on either side of the pipe, holding it firmly at the required spacing.

Key Benefits

• Strong fixing: Holds pipes firmly at the correct spacing during screed installation.

• Corrosion resistant: Plastic staples will not rust inside the screed.

• Pipe friendly: Smooth edges protect PEX and PE-RT pipes from damage.

• Quick to install: Can be hammered or pressed in quickly along pipe runs.

• Bulk available: Supplied in large quantities for both small and large projects.

How They Are Used

The staples are applied at regular intervals as the pipe is laid on the mesh or insulation. They are especially important around bends, at points where the pipe changes direction, and near the manifold. Once the pipe network is fully stapled and pressure-tested, the screed is poured over the top. The staples ensure the pipe does not float or move during this process, maintaining the designed heat distribution.

Conclusion

Underfloor heating pipe staples are a small but vital component of every underfloor heating installation. By providing secure, corrosion-resistant, and pipe-friendly fixing, they help ensure the system performs reliably for many years.